FIBERLite: The Carbon Fibre alternative
A range of rotors, adapters and accessories compatible with Sorvall, Beckman, Jouan, Eppendorf and IEC Centrifuges.
Why Carbon Fibre?
Up to 65% less weight than equivalent metallic rotors
Shorter run times
Ease of use
Less wear and tear on the centrifuge drive system
Below OSHA Safety lifting limits
Compatible with all earlier floor model centrifuges
No need to buy a new expensive centrifuge
FIBERLite rotors are insulators
Samples are kept at a constant temperature during centrifugation
Less wear and tear on refrigeration system
FIBERLite rotors will not corrode
Not corroded with alkalis, caustic aqueous solutions and most organic solvents.
Rotors are autoclavable indefinitely for sterile use.
FIBERLite rotors do not fatigue
No degradation for extended run cycles and adapters can be used at max g-forces.
FIBERLite rotors have Limited Lifetime Warranty with unlimited number of run cycles.
FIBERLite rotors are compression molded
Rotor cavities are "molded" to the exact tolerances.
Oak Ridge bottles lasts longer and conical tubes can be run at max g-forces.
FIBERLite :
75006526, F13S-14x50c
Compatible with the Sorvall Legend T Plus and Legend RT Plus and the Multifuge 3 series
46922, F13S-14x50cy
Compatible with RC2, RC5, RC6, RC26, Evolution RC centrifuges 13,000 RPM, 28,960xg
78500, F14S-6x250y
Compatible with RC2, RC5, RC6, RC26, Evolution RC centrifuges, 14000 RPM, 30074 xg
096-064025, F20S-6x100
Compatible with RC2, RC5, RC26, Evolution RC centrifuges, 20000 RPM, 43904 xg
46923, F21S-8x50y ( SS-34 ) Carbon Fiber Rotor for Round Bottom Tubes
Compatible with RC2,RC5,RC6,RC26,Evolution RC centrifuges, 21,000 RPM, 52,356xg
096-484020, F21S-48x1.5
Compatible with RC2, RC5, RC26, Evolution RC centrifuges, 21000 RPM, 46428 xg
096-145007, F13B-14x50cy FIBERLite rotorsCompatible with J2 Series centrifuges, 13000 RPM, 28960 xg |
|
096-062114, F10BA-6x500y FIBERLite rotorsCompatible with the Beckman J2 Series, Avanti J25i and J20i |
|
096-061110, F8BA-6x1000y FIBERLite rotorsCompatible with the Avanti J20i |
|
096-062107, F14BA-6x250y FIBERLite rotorsCompatible with the Avanti J20i and Beckman J2 Series |
|
096-028015, H3-LV High Volume FIBERLite rotorsComptible with RC3 Series centrifuges, 3200 RPM, 1938 xg |
|
75006483, F10S-6x250y FIBERLite rotorsComptible with RC4 (USA), RC-4 centrifuges, Heraeus Cryofuge 5500i 10000 RPM, 15344 xg,... |
|
096-145017, F10S-14x50cy FIBERLite rotorsComptible with RC4 (USA), RC-4, Heraeus Cryofuge 5500i centrifuges, 10000 RPM, 17136 xg,... |
|
096-087051, F50L-8x39 FIBERLite rotorsCompatible with ULTRA centrifuges, 50000 RPM, 257600 xg |
|
096-067135, F65L-6X13.5 FIBERLite rotorsComptible with ULTRA centrifuges, 65000 RPM, 324142 xg |
|
12002, Adapter 60x120mm FIBERLite adapters1 place each |
|
00372, Adapter rubber 1 FIBERLite adapters |
|
00458, Adapter tube 45x FIBERLite adapters |
|
00371, Adapter rubber 1 FIBERLite adapters |
|
00456, Adapter polypropylene FIBERLite adapters |
|
010-1117, 2 x 250ml to 7x8/10ml adapter FIBERLite adapters |
|
010-1119, 2 x 250ml to 100 ml adapter FIBERLite adapters |
|
010-1073, 2 x 250ml to 5x15ml conical adapter FIBERLite adapters |
|
010-1074, 2 x 250ml to 5x16ml adapter FIBERLite adapters |
|
010-1121, 2 x 250ml to 175ml conical adapter FIBERLite adapters |
|
25 FIBERLite of 212 Show all...
